Out of stock
OVERALL SIZE
240 mm x 181 mm x 42 mm (9.4” x 6.8” x 1.6”)
PANEL CUTOUT SIZE
220 mm x 160 mm (8.7″ x 6.3″)
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
WEIGHT
0.88kg
PRODUCT VARIANTS
8620-01 – 8620 Auto Mains (Utility) Failure Control Module
$2,514.99
Out of stock
The DSE8620 is an intelligent mono display auto mains (utility) failure load share control module packed with industry leading features to enhance paralleling single gensets with a mains (utility) supply.
The DSE8620 automatically controls the change over between mains (utility) and generator power and can also be configured to run a generator in synchronisation with a mains (utility) supply.
| Weight | 2.2 oz |
|---|---|
| Dimensions | 12 × 9 × 4 in |
| BRANDS | DSE |
| Key Features | Key Benefits |
| Mains (Utility) failure detection, mains (utility) power monitoring (kW, kV Ar, kV A & pf) monitoring, mains (utility) decoupling protection, mains (utility) kW export protection. | Gives full mains (utility) back-up and provides no break synchronisation that includes peak lopping and peak shaving options with mains (utility) power monitoring. |
| Configurable inputs/outputs (11/8). | Provides multiple installation options. |
| Dead bus sensing. | Provides rapid power delivery on multi-set systems. |
| Direct governor control. | Eliminates the requirement for external control equipment. |
| kW & kV Ar load sharing. | Provides controlled power delivery. |
| Remote communications (RS232, RS485 x2, Ethernet). | Provides secure and simple off site monitoring. All ports are continuously active. |
| Configurable event log (250). | Provides access to historical alarms and operational status. |
| Integral PLC editor. | Ensures additional applications are easily integrated into the system. |
| Load switching, load shedding & dummy load outputs. | Allows load options and dummy load requirements to be independently controlled. |
| Power monitoring (kW h, kVAr, kv Ah, kV Ar h), reverse power protection, kW overload protection. | Provides clear accurate power measurement information. |
| Data logging (USB Memory Stick). | Provides current and historical status information. |
| DSE Configuration Suite PC Software. | Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring. |
| Tier 4 CAN engine support. | Ensures the control module can be used with the latest in modern electronic engine technology. |
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries
MAXIMUM OPERATING CURRENT
460 mA at 12 V, 245 mA at 24 V
MAXIMUM STANDBY CURRENT
375 mA at 12 V, 200 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
OUTPUT A (FUEL)
15 A DC at supply voltage
OUTPUT B (START)
15 A DC at supply voltage
OUTPUTS C & D
8 A 250 V (Volt free)
AUXILIARY OUTPUTS E,F,G
2 A DC at supply voltage
VOLTAGE RANGE
15 V – 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)
MINIMUM LOAD IMPEDANCE
1000Ω
Fully isolated
GAIN VOLTAGE
0 V to 10 V DC
Fully isolated
OFFSET VOLTAGE
+/- 10 V DC
Fully isolated
MINIMUM LOAD IMPEDANCE
1000Ω
Fully isolated
GAIN VOLTAGE
0 V to 10 V DC
Fully isolated
OFFSET VOLTAGE
+/- 10 V DC
Fully isolated
OVERALL SIZE
170 mm x 305 mm x 116 mm (6.7” x 12.0” x 4.6”)
WEIGHT
2.3kg
PRODUCT VARIANTS
BC2410Ei-01 – 12/24 Volt 10 Amp Enclosed Intelligent Battery Charger (Display)
BC2410Ei-02 – 12/24 Volt 10 Amp Enclosed Intelligent Battery Charger (Display & Meters)
BC2410Ei-03 – 12/24 Volt 10 Amp Enclosed Intelligent Battery Charger (Meters)
OVERALL SIZE
245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″)
PANEL CUTOUT SIZE
220 mm x 160 mm (8.7″ x 6.3″)
MAXIMUM PANEL THICKNESS
8.0 mm (0.3″)
PRODUCT VARIANTS
7320-03 – 7320 MKII Auto Mains (Utility) Failure Control Module
