$568.59
The DSE334 Automatic Transfer Switch Control Module monitors the voltage and frequency of an incoming AC supply from two different sources. These sources can be generator or mains (utility), or a combination of both.
The control module monitors Source 1 (S1) and Source 2(S2). When a failure occurs a start command is issued to the inactive source to take over the load. The module will return the load to the mains (utility) as soon as this becomes available.
| Weight | 1.2 oz |
|---|---|
| Dimensions | 12 × 9 × 4 in |
| BRANDS | DSE |
| Key Features | Key Benefits |
| Automatic switch over between supplies. | Switches power when mains (utility) supply fails and switches back when mains (utility) supply returns. |
| Manual restore to S1. | Allows flexible control of source inputs. |
| Configurable inputs/outputs (10/5). | Provides multiple installation options. |
| Optional current monitoring. | Provides accurate information on over and under current conditions. |
| Source 1/source 2 control. | Allows flexible control of source inputs. |
| Check sync feature. | Ensures the smoothest possible transfer is achieved. |
| Compatible with DSE160 power supply. | When no DC supply is available the DSE160 power supply connects to an AC power supply and then to the control module. |
| DSE Configuration Suite PC Software. | Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring. |
| Configurable event log (10). | Provides access to historical alarms and operational status. |
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT
292 mA at 12 V, 167 mA at 24 V
MAXIMUM STANDBY CURRENT
101 mA at 12 V, 66 mA at 24 V
MAINS (UTILITY)
VOLTAGE RANGE
15 V to 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
OUTPUT A (MAINS/UTILITY/S1)
Normally closed volt-free output 8 A AC at 250 V AC
OUTPUT B (GENERATOR/S2)
Normally open volt-free output 8 A AC at 250 V AC
OUTPUT C (START AND RUN)
Normally closed volt-free output 8 A DC at 35 V DC (UL Rating 30 V)
OUTPUT D
Changeover volt-free output 8 A AC at 250 V AC
OUTPUT E
Normally open volt-free output 8 A AC at 250 V AC
VOLTAGE RANGE
15 V to 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
OVERALL SIZE
108 mm x 101 mm x 49 mm (4.2” x 4.0” x 1.9”)
WEIGHT
0.16kg
PRODUCT VARIANTS
9150-00 – 12 volt 3 amp Compact Battery Charger (90v-265v 50/60Hz)
OVERALL SIZE
245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″)
PANEL CUTOUT SIZE
220 mm x 160 mm (8.7″ x 6.3″)
MAXIMUM PANEL THICKNESS
8.0 mm (0.3″)
PRODUCT VARIANTS
7320-03 – 7320 MKII Auto Mains (Utility) Failure Control Module
Original TPS051GT8-000 | Engine Heater 
Original DSE9470 | MKII 24 volt 10 amp Intelligent Battery Charger | 9470-01 
