The S.R.7/2-G regulator is an advanced electronic regulator of small size and economical price, even if it is very reliable. This regulator is equipped with a low speed and overload protection with an adjustable intervention threshold, it works at 50/60 Hz, it has an adjustable voltage stability and it offers the possibility for a remote voltage regulation
Basler AVR, Marathon AVR, Mecc Alte AVR
Mecc Alte AVR SR7-2G (SR-7) | Original
- Sensing Input: Terminal 1,2 3,4 5,6 Can be connected to Y or 220~480VAC Single Phase 50/60HZ.
- Power Input:50~280VAC (1,2) 50/60HZ.
- Output Voltage: Maximum 90VDC @ 220VAC Harmonic Wave. Output Current: Continuous 6A Maximum 8A for 10 sec.
Call for Quote for international purchases!
Related products
-
AVR | Generic Replacements
AVR SX440 | Generic Replacement AS440
INPUT
Voltage: 190 – 264V ac
Frequency: 50-60 Hz nominal. Phase:1 Wire: 2
OUTPUT
Voltage: max 90V dc at 207 V ac input
Current: continuous 4A dc
Intermittent 6A for 10 secs
Resistance: 15 ohms minimum
REGULATION: +/- 1%
Call for Quote for international purchases!
SKU: Sx440G -
AVR | Generic Replacements
AVR R449 | Generic
- Automatic Voltage Regulator | Exact Generic Replacement for R449
- Steady state voltage regulation ± 0.5%
- Short circuit capability: 3 x Irated for 10 seconds (AREP or PMG excitation)
- Voltage sensing: 0-110v Terminals = 95 to 140 volts (50/60 Hz) or 0-220v Terminals = 170 to 260 volts (50/60 Hz) or 0-380v Terminals = 340 to 520 volts (50/60 Hz)
- Response time: Normal (1 sec) for ± 20% voltage variation or Rapid (0.3 sec) for ± 20% voltage variation.
- Remote voltage adjustment range: ± 5%
Call for Quote for international purchases!
SKU: R449G -
Leroy Somer AVR
Leroy Somer AVR R438 | Original
Fuse: F1on X1,X2.10A;slow-250V
- Voltage sensing : 5 VA isolated via trans- former • 0-110 V terminals = 95 to 140 V • 0-220 V terminals = 170 to 260 V • 0-380 V terminals = 340 to 520 V for other voltages, a transformer should be used.
- Voltage regulation ± 0.5%
- Normal or rapid response time via jumper ST2 (see below)
- Voltage adjustment via potentiometer P2 or apply a DC voltage of ± 1 V on the terminals of the external potentiometer
- Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. Š 2.5 VA cl1, secondary 1A (optional)
- Quadrature droop adjustment via potentio- meter P1
Call for Quote for international purchases!
SKU: R438 -
AVR | Generic Replacements
AVR MX341 | Generic
- SENSING INPUT
Voltage: 190- 264V ac max, 1 phase, 2 wire
Frequency : 50 – 60 Hz nominal
POWER INPUT (PMG)
Voltage 140-220V ac max, 3 phase, 3 wire
Current: 3A/phase
Frequency: 100 120 Hz nominal
OUTPUT
Voltage: max 120V dc
Current: continuous 2.7 A
Intermittent 6a for 10 secs.
Resistance: 15 ohms minimum
REGULATION: +/- 1%
Call for Quote for international purchases!
SKU: MX341G - SENSING INPUT
