Stamford AVR AS440 | Original
Features include:
- Stability adjustment
- Optimum response selection
- Under frequency roll off adjustment
- Droop adjustment
- Trim adjustment
Call for Quote for international purchases!
The AS440 ( + Kit replaces SX440 ; SA465) is a half-wave phase-controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator. In addition to regulating the generator voltage, the AVR circuitry includes underspeed and sensing loss protection to ensure safe, reliable control of the generator.
Related products
-
AVR | Generic Replacements
AVR MX321 | Generic
SENSING INPUT
Voltage: 190 – 264V ac max, 2 or 3 phase
Frequency: 50 – 60 HZ nominal
POWER INPUT (PMG)
Voltage: 170-220V ac max, 3 phase, 3 wire
Current: 3A/phase
Frequency: 100 – 120 Hz nominal
OUTPUT
Voltage: max 120V dc
Current: continuous 3.7 A
Intermittent 6A for 10 secs.
Resistance: 15 ohms minimum
REGULATION: +/- 0.5% RMS with 4% engine governing
Call for Quote for international purchases!
SKU: MX321G -
AVR | Generic Replacements
AVR R250 | Generic
- Power Input: AC 80-140V (50 / 60Hz)
- Maximum output: DC 90V / 6A / 10S
- Detection voltage input: AC 115V
- Voltage regulation rate: ≤ ± 1% External voltage trimming 1K / 2W potentiometer ± 10%
- Voltage regulation +/- 0.5% at steady state and constant speed
Call for Quote for international purchases!
SKU: R250G -
AVR | Generic Replacements
AVR SX460 | Generic
Sensing Input
Voltage: 95 – 132 VAC or 190 – 264 VAC
1 phase, jumper selectable. Frequency 50/60 Hz, selectable
Output
Voltage: Max. 90 VDC @ 207 VAC
Current: Continuous 4A
Intermittent 10A for sec
Resistance: Min. 15 ohm
Voltage Regulation:< ± 1.5 % ( with 4% engine governing)
Voltage Build-Up: Residual voltage at AVR terminal > 5 VAC
Thermal Drift: 0.05% peer C change in AVR ambient.
Call for Quote for international purchases!
SKU: SX460G -
Leroy Somer AVR
Leroy Somer AVR R449 | Original
The regulator includes:
- A main terminal strip (10 terminals)
- A secondary terminal block (5 terminals)
- A frequency selection terminal block (3 terminals) – A quadrature droop potentiometer
- A voltage potentiometer
- A stability potentiometer
- A maximum excitation potentiometer
- A sensing selection jumper ST1 (single/3-phase with an external module)
- A response time jumper ST2 – A frequency selection jumper ST3 – An external voltage setting jumper ST4 – A LAM (load adjustment module) jumper ST5
- From R449 Version E number 10,000, this jumper will be removable.
- A selecti
Call for Quote for international purchases!
SKU: R449
