The AS440 ( + Kit replaces SX440 ; SA465) is a half-wave phase-controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator. In addition to regulating the generator voltage, the AVR circuitry includes underspeed and sensing loss protection to ensure safe, reliable control of the generator.
Uncategorized
Stamford AVR AS440 | Original
Features include:
- Stability adjustment
- Optimum response selection
- Under frequency roll off adjustment
- Droop adjustment
- Trim adjustment
Call for Quote for international purchases!
Related products
-
AVR | Generic Replacements
AVR R450 | Generic
0 out of 5(0)The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers.
- Operating temperature: – 30°C to + 65° C. – Storage temperature: – 55°C to + 85°C.
- Shocks on the base: 9 g depending on the 3 axes.
- Vibrations: less than 10 Hz, 2 mm half-peak amplitude 10 Hz to 100 Hz: 100 mm/s, above 100 Hz: 8 g.
Call for Quote for international purchases!
SKU: R450G$174.49 -
AVR | Generic Replacements
AVR SX460 | Generic
0 out of 5(0)Sensing Input
Voltage: 95 – 132 VAC or 190 – 264 VAC
1 phase, jumper selectable. Frequency 50/60 Hz, selectable
Output
Voltage: Max. 90 VDC @ 207 VAC
Current: Continuous 4A
Intermittent 10A for sec
Resistance: Min. 15 ohm
Voltage Regulation:< ± 1.5 % ( with 4% engine governing)
Voltage Build-Up: Residual voltage at AVR terminal > 5 VAC
Thermal Drift: 0.05% peer C change in AVR ambient.
Call for Quote for international purchases!
SKU: SX460G$23.99$28.48 -
Leroy Somer AVR
Leroy Somer AVR R438 | Original
0 out of 5(0)Fuse: F1on X1,X2.10A;slow-250V
- Voltage sensing : 5 VA isolated via trans- former • 0-110 V terminals = 95 to 140 V • 0-220 V terminals = 170 to 260 V • 0-380 V terminals = 340 to 520 V for other voltages, a transformer should be used.
- Voltage regulation ± 0.5%
- Normal or rapid response time via jumper ST2 (see below)
- Voltage adjustment via potentiometer P2 or apply a DC voltage of ± 1 V on the terminals of the external potentiometer
- Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. Š 2.5 VA cl1, secondary 1A (optional)
- Quadrature droop adjustment via potentio- meter P1
Call for Quote for international purchases!
SKU: R438 -
AVR | Generic Replacements
AVR SR7-2G (SR-7) | Generic
0 out of 5(0)- EXACT GENERIC REPLACEMENT – 1 Year Warranty
- Sensing Input: Terminal 1,2 3,4 5,6 Can be connected to Y or 220~480VAC Single Phase 50/60HZ.
- Power Input:50~280VAC (1,2) 50/60HZ.
- Output Voltage: Maximum 90VDC @ 220VAC Harmonic Wave.
- Output Current: Continuous 6A Maximum 8A for 10 sec.
Call for Quote for international purchases!
SKU: SR72G-G$63.69$66.49

















