-
×
AVR MX341 | Generic
1 × $66.50 -
×
AVR SX440 | Generic Replacement AS440
1 × $41.89
Subtotal: $108.39
Uncategorized
Stamford AVR MX341 | Original
- Features include:
- Stability adjustment *Optimum response selection
- Under frequency roll off adjustment *Dip adjustment
- Droop adjustment *Trim adjustment
- Over excitation adjustment
Call for Quote for international purchases!
The MX341 is a two phase sensed Automatic Voltage Regulator and forms part of the excitation system for a brushless generator. In addition to regulating the generator voltage, the AVR circuitry includes protective features to ensure safe reliable control of the generator. This model supercedes the Series 3 range (same footprint & wiring 1 extra terminal) This AVR is used only in cojunction with permenant magnetic type alternators.
Related products
-
Leroy Somer AVR
Leroy Somer AVR R438 | Original
Fuse: F1on X1,X2.10A;slow-250V
- Voltage sensing : 5 VA isolated via trans- former • 0-110 V terminals = 95 to 140 V • 0-220 V terminals = 170 to 260 V • 0-380 V terminals = 340 to 520 V for other voltages, a transformer should be used.
- Voltage regulation ± 0.5%
- Normal or rapid response time via jumper ST2 (see below)
- Voltage adjustment via potentiometer P2 or apply a DC voltage of ± 1 V on the terminals of the external potentiometer
- Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. Š 2.5 VA cl1, secondary 1A (optional)
- Quadrature droop adjustment via potentio- meter P1
Call for Quote for international purchases!
SKU: R438 -
Leroy Somer AVR
Leroy Somer AVR R449 | Original
The regulator includes:
- A main terminal strip (10 terminals)
- A secondary terminal block (5 terminals)
- A frequency selection terminal block (3 terminals) – A quadrature droop potentiometer
- A voltage potentiometer
- A stability potentiometer
- A maximum excitation potentiometer
- A sensing selection jumper ST1 (single/3-phase with an external module)
- A response time jumper ST2 – A frequency selection jumper ST3 – An external voltage setting jumper ST4 – A LAM (load adjustment module) jumper ST5
- From R449 Version E number 10,000, this jumper will be removable.
- A selecti
Call for Quote for international purchases!
SKU: R449 -
AVR | Generic Replacements
AVR SX460 | Generic
Sensing Input
Voltage: 95 – 132 VAC or 190 – 264 VAC
1 phase, jumper selectable. Frequency 50/60 Hz, selectable
Output
Voltage: Max. 90 VDC @ 207 VAC
Current: Continuous 4A
Intermittent 10A for sec
Resistance: Min. 15 ohm
Voltage Regulation:< ± 1.5 % ( with 4% engine governing)
Voltage Build-Up: Residual voltage at AVR terminal > 5 VAC
Thermal Drift: 0.05% peer C change in AVR ambient.
Call for Quote for international purchases!
SKU: SX460G -
AVR | Generic Replacements
AVR R450 | Generic
The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers.
- Operating temperature: – 30°C to + 65° C. – Storage temperature: – 55°C to + 85°C.
- Shocks on the base: 9 g depending on the 3 axes.
- Vibrations: less than 10 Hz, 2 mm half-peak amplitude 10 Hz to 100 Hz: 100 mm/s, above 100 Hz: 8 g.
Call for Quote for international purchases!
SKU: R450G
