Stamford AVR MX341 | Original
- Features include:
- Stability adjustment *Optimum response selection
- Under frequency roll off adjustment *Dip adjustment
- Droop adjustment *Trim adjustment
- Over excitation adjustment
Call for Quote for international purchases!
The MX341 is a two phase sensed Automatic Voltage Regulator and forms part of the excitation system for a brushless generator. In addition to regulating the generator voltage, the AVR circuitry includes protective features to ensure safe reliable control of the generator. This model supercedes the Series 3 range (same footprint & wiring 1 extra terminal) This AVR is used only in cojunction with permenant magnetic type alternators.
Related products
-
Leroy Somer AVR
Leroy Somer AVR R438 | Original
Fuse: F1on X1,X2.10A;slow-250V
- Voltage sensing : 5 VA isolated via trans- former • 0-110 V terminals = 95 to 140 V • 0-220 V terminals = 170 to 260 V • 0-380 V terminals = 340 to 520 V for other voltages, a transformer should be used.
- Voltage regulation ± 0.5%
- Normal or rapid response time via jumper ST2 (see below)
- Voltage adjustment via potentiometer P2 or apply a DC voltage of ± 1 V on the terminals of the external potentiometer
- Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. Š 2.5 VA cl1, secondary 1A (optional)
- Quadrature droop adjustment via potentio- meter P1
Call for Quote for international purchases!
SKU: R438 -
Leroy Somer AVR
Leroy Somer AVR R448 | Original
- Voltage regulation ± 0.5%
- Short circuit capability: 3 x Irated for 10 seconds (AREP or PMG excitation)
- Voltage sensing: 95 to 140 volts (50/60 Hz) or 170 to 260 volts (50/60 Hz) or 340 to 520 volts (50/60 Hz)
- Response time: Normal (1 sec) for ± 20% voltage variation or Rapid (0.3 sec) for ± 20% voltage variation
- Remote voltage adjustment range of: ± 5%
Call for Quote for international purchases!
SKU: R448 -
AVR | Generic Replacements
AVR SX460 | Generic
Sensing Input
Voltage: 95 – 132 VAC or 190 – 264 VAC
1 phase, jumper selectable. Frequency 50/60 Hz, selectable
Output
Voltage: Max. 90 VDC @ 207 VAC
Current: Continuous 4A
Intermittent 10A for sec
Resistance: Min. 15 ohm
Voltage Regulation:< ± 1.5 % ( with 4% engine governing)
Voltage Build-Up: Residual voltage at AVR terminal > 5 VAC
Thermal Drift: 0.05% peer C change in AVR ambient.
Call for Quote for international purchases!
SKU: SX460G -
AVR | Generic Replacements
AVR R230 | Generic Replacement R250
- Voltage regulation: around ± 0.5%.
- Voltage supply/sensing range 85 to 139 V (50/60 Hz)
- Rapid response time (500 ms) for a transient voltage variation amplitude of ± 20% – Voltage setting P1
Stability setting P2. - Power supply protected by 8 A fuse, slow- blow action (tolerates 10 A for 10 s)
- Frequency: 50 Hz with ST3 jumper
- 60 Hz without ST3 jumper
- Factory-set underspeed protection P3. 2.2
- R230 AVR option
- Potentiometer for remote voltage adjustment, 1000 Ω / 0.5 W min: adjustment range ± 5%. – Remove the ST4 jumper.
Call for Quote for international purchases!
SKU: R230G
