-
×
AVR SX460 | Generic
1 × $23.99 -
×
AVR R449 | Generic
1 × $85.59
Subtotal: $109.58
Uncategorized
Stamford AVR SX460 | Original
Features include:
- Stability adjustment
- Under frequency roll off adjustment
Call for Quote for international purchases!
The SX460 is a half-wave phase-controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator. In addition to regulating the generator voltage, the AVR circuitry includes underspeed and sensing loss protection to ensure safe, reliable control of the generator. This model supercedes the Series 6 range.
Related products
-
AVR | Generic Replacements
AVR R250 | Generic
- Power Input: AC 80-140V (50 / 60Hz)
- Maximum output: DC 90V / 6A / 10S
- Detection voltage input: AC 115V
- Voltage regulation rate: ≤ ± 1% External voltage trimming 1K / 2W potentiometer ± 10%
- Voltage regulation +/- 0.5% at steady state and constant speed
Call for Quote for international purchases!
SKU: R250G -
AVR | Generic Replacements
AVR R438 | Generic
- Voltage regulation ±0.5%
- Short circuit capability: 3 x Irated for 10 seconds ( AREP or PMG excitation)
- Voltage sensing: 95 to 140 volts (50/60 Hz) or 170 to 260 volts (50/60 Hz) or 340 to 520 volts (50/60 Hz)
- Response time: Normal (1sec) for _+20% voltage variation or rapid (0.3 sec) for ∼+20% voltage variation.
- Remote voltage adjustment range of: _+5% *1000 Series alternators do not have PMG option.
Call for Quote for international purchases!
SKU: R438G -
Leroy Somer AVR
Leroy Somer AVR R438 | Original
Fuse: F1on X1,X2.10A;slow-250V
- Voltage sensing : 5 VA isolated via trans- former • 0-110 V terminals = 95 to 140 V • 0-220 V terminals = 170 to 260 V • 0-380 V terminals = 340 to 520 V for other voltages, a transformer should be used.
- Voltage regulation ± 0.5%
- Normal or rapid response time via jumper ST2 (see below)
- Voltage adjustment via potentiometer P2 or apply a DC voltage of ± 1 V on the terminals of the external potentiometer
- Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. Š 2.5 VA cl1, secondary 1A (optional)
- Quadrature droop adjustment via potentio- meter P1
Call for Quote for international purchases!
SKU: R438
