Stamford AVR SX460 | Original
Features include:
- Stability adjustment
- Under frequency roll off adjustment
Call for Quote for international purchases!
The SX460 is a half-wave phase-controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator. In addition to regulating the generator voltage, the AVR circuitry includes underspeed and sensing loss protection to ensure safe, reliable control of the generator. This model supercedes the Series 6 range.
Related products
-
Leroy Somer AVR
Leroy Somer R250 | Original
- Power Input: AC 80-140V (50 / 60Hz)
- Maximum output: DC 90V / 6A / 10S
- Detection voltage input: AC 115V
- Voltage regulation rate: ≤ ± 1% External voltage trimming 1K / 2W potentiometer ± 10%
- Voltage regulation +/- 0.5% at steady state and constant speed
Call for Quote for international purchases!
SKU: R250 -
Leroy Somer AVR
Leroy Somer AVR R448 | Original
- Voltage regulation ± 0.5%
- Short circuit capability: 3 x Irated for 10 seconds (AREP or PMG excitation)
- Voltage sensing: 95 to 140 volts (50/60 Hz) or 170 to 260 volts (50/60 Hz) or 340 to 520 volts (50/60 Hz)
- Response time: Normal (1 sec) for ± 20% voltage variation or Rapid (0.3 sec) for ± 20% voltage variation
- Remote voltage adjustment range of: ± 5%
Call for Quote for international purchases!
SKU: R448 -
AVR | Generic Replacements
AVR SX460 | Generic
Sensing Input
Voltage: 95 – 132 VAC or 190 – 264 VAC
1 phase, jumper selectable. Frequency 50/60 Hz, selectable
Output
Voltage: Max. 90 VDC @ 207 VAC
Current: Continuous 4A
Intermittent 10A for sec
Resistance: Min. 15 ohm
Voltage Regulation:< ± 1.5 % ( with 4% engine governing)
Voltage Build-Up: Residual voltage at AVR terminal > 5 VAC
Thermal Drift: 0.05% peer C change in AVR ambient.
Call for Quote for international purchases!
SKU: SX460G -
Leroy Somer AVR
Leroy Somer AVR R450 | Original
The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers.
- Operating temperature: – 30°C to + 65° C. – Storage temperature: – 55°C to + 85°C.
- Shocks on the base: 9 g depending on the 3 axes.
- Vibrations: less than 10 Hz, 2 mm half-peak amplitude 10 Hz to 100 Hz: 100 mm/s, above 100 Hz: 8 g.
Call for Quote for international purchases!
SKU: R450
