Shop
-
AVR | Generic Replacements
AVR R230 | Generic Replacement R250
- Voltage regulation: around ± 0.5%.
- Voltage supply/sensing range 85 to 139 V (50/60 Hz)
- Rapid response time (500 ms) for a transient voltage variation amplitude of ± 20% – Voltage setting P1
Stability setting P2. - Power supply protected by 8 A fuse, slow- blow action (tolerates 10 A for 10 s)
- Frequency: 50 Hz with ST3 jumper
- 60 Hz without ST3 jumper
- Factory-set underspeed protection P3. 2.2
- R230 AVR option
- Potentiometer for remote voltage adjustment, 1000 Ω / 0.5 W min: adjustment range ± 5%. – Remove the ST4 jumper.
Call for Quote for international purchases!
SKU: R230G -
AVR | Generic Replacements
AVR R250 | Generic
- Power Input: AC 80-140V (50 / 60Hz)
- Maximum output: DC 90V / 6A / 10S
- Detection voltage input: AC 115V
- Voltage regulation rate: ≤ ± 1% External voltage trimming 1K / 2W potentiometer ± 10%
- Voltage regulation +/- 0.5% at steady state and constant speed
Call for Quote for international purchases!
SKU: R250G -
AVR | Generic Replacements
AVR R438 | Generic
- Voltage regulation ±0.5%
- Short circuit capability: 3 x Irated for 10 seconds ( AREP or PMG excitation)
- Voltage sensing: 95 to 140 volts (50/60 Hz) or 170 to 260 volts (50/60 Hz) or 340 to 520 volts (50/60 Hz)
- Response time: Normal (1sec) for _+20% voltage variation or rapid (0.3 sec) for ∼+20% voltage variation.
- Remote voltage adjustment range of: _+5% *1000 Series alternators do not have PMG option.
Call for Quote for international purchases!
SKU: R438G -
AVR | Generic Replacements
AVR R448 | Generic
- Voltage regulation ± 0.5%
- Short circuit capability: 3 x Irated for 10 seconds (AREP or PMG excitation)
- Voltage sensing: 95 to 140 volts (50/60 Hz) or 170 to 260 volts (50/60 Hz) or 340 to 520 volts (50/60 Hz)
- Response time: Normal (1 sec) for ± 20% voltage variation or Rapid (0.3 sec) for ± 20% voltage variation
- Remote voltage adjustment range of: ± 5%
Call for Quote for international purchases!
SKU: R448G -
AVR | Generic Replacements
AVR R449 | Generic
- Automatic Voltage Regulator | Exact Generic Replacement for R449
- Steady state voltage regulation ± 0.5%
- Short circuit capability: 3 x Irated for 10 seconds (AREP or PMG excitation)
- Voltage sensing: 0-110v Terminals = 95 to 140 volts (50/60 Hz) or 0-220v Terminals = 170 to 260 volts (50/60 Hz) or 0-380v Terminals = 340 to 520 volts (50/60 Hz)
- Response time: Normal (1 sec) for ± 20% voltage variation or Rapid (0.3 sec) for ± 20% voltage variation.
- Remote voltage adjustment range: ± 5%
Call for Quote for international purchases!
SKU: R449G -
AVR | Generic Replacements
AVR R450 | Generic
The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers.
- Operating temperature: – 30°C to + 65° C. – Storage temperature: – 55°C to + 85°C.
- Shocks on the base: 9 g depending on the 3 axes.
- Vibrations: less than 10 Hz, 2 mm half-peak amplitude 10 Hz to 100 Hz: 100 mm/s, above 100 Hz: 8 g.
Call for Quote for international purchases!
SKU: R450G -
AVR | Generic Replacements
AVR SE350 | Generic
- Output Power – Continuous 73 Vdc at 3.5 Adc (255w) – 1 year warranty
- Frequency Compensation Adjustable
- EMI Suppression Internal electromagnetic interference filter (EMI Filter).
- Roll Off Frequency 54-61 Hz for 60 Hz Operation 45-51 Hz for 50 Hz Operation
- Storage Temperature -65°C to +85°C
Call for Quote for international purchases!
SKU: SE350G -
AVR | Generic Replacements
AVR SR7-2G (SR-7) | Generic
- EXACT GENERIC REPLACEMENT – 1 Year Warranty
- Sensing Input: Terminal 1,2 3,4 5,6 Can be connected to Y or 220~480VAC Single Phase 50/60HZ.
- Power Input:50~280VAC (1,2) 50/60HZ.
- Output Voltage: Maximum 90VDC @ 220VAC Harmonic Wave.
- Output Current: Continuous 6A Maximum 8A for 10 sec.
Call for Quote for international purchases!
SKU: SR72G-G -
AVR | Mcpherson Controls
AVR SS350 | Mcpherson Controls
- Voltage Regulation < ±1% (with 4% engine governing)
- Optional 120/240 VAC Sensing Input Switch
- 50/60 Hz, Jumper Selectable
- Under Frequency Protection
- Built-in High Breaking Capacity Fuse – EMI Suppression.
Call for Quote for international purchases!
SKU: SS350 -
AVR | Generic Replacements
AVR SX440 | Generic Replacement AS440
INPUT
Voltage: 190 – 264V ac
Frequency: 50-60 Hz nominal. Phase:1 Wire: 2
OUTPUT
Voltage: max 90V dc at 207 V ac input
Current: continuous 4A dc
Intermittent 6A for 10 secs
Resistance: 15 ohms minimum
REGULATION: +/- 1%
Call for Quote for international purchases!
SKU: Sx440G -
AVR | Generic Replacements
AVR SX460 | Generic
Sensing Input
Voltage: 95 – 132 VAC or 190 – 264 VAC
1 phase, jumper selectable. Frequency 50/60 Hz, selectable
Output
Voltage: Max. 90 VDC @ 207 VAC
Current: Continuous 4A
Intermittent 10A for sec
Resistance: Min. 15 ohm
Voltage Regulation:< ± 1.5 % ( with 4% engine governing)
Voltage Build-Up: Residual voltage at AVR terminal > 5 VAC
Thermal Drift: 0.05% peer C change in AVR ambient.
Call for Quote for international purchases!
SKU: SX460G -
AVR | Generic Replacements
AVR VR6 | Generic
- Power: Shunt Excited
- Input: 180-280 Vac, 50/60 Hz, 1 OR 3 phase
- PMG Excited 63-105 Vac 100/240 Hz 3 phase
- Sensing input: 180-240 Vac, 50/60 Hz 1 OR 3 phase
- CT input: 1 or 5 Aac 50/60 Hz
- ACC input: +/- 3 Vdc. Output 65 Vdc @ 12 Adc
- Unit Type: Potted – Rugged
- Weight: 1.5 kgSize: 9.4 in x 7.1 in x 3.5 in
- 4 mounting holes
- 1 Year Warranty
Call for Quote for international purchases!
SKU: VR6G -
AVR | Generic Replacements, Uncategorized
AVR-5KW | 450V 470uF
- Gasoline and Diesel Generator driven by 173F 177F 182F 188F 190F engine
- FITS FOR – 4KW to 7.5KW rated power generator driven by gasoline engine from 9HP,11HP,13HP,14HP,and also work with diesel generators.
- CAPACITOR – 450V 470uF
- 5.5 inches / 140mm hole to hole on center, Totally 6 wires, 4 wires in one connector and 2 single wires
- Very stable. You may need to adjust the little brass screw clockwise to meet your desired voltage output.
Call for Quote for international purchases!
SKU: AVR-5KW -
Basler AVR, Marathon AVR, Mecc Alte AVR
Basler AVR AVC63-7 | Original
- < ± 1.5% Regulation
- Soft Start Voltage Ramping – Sensing Voltage Loss Protection
- 120 or 240 VAC Sensing, Jumper Selectable Under Frequency Roll Off Protection
- With Under Frequency LED Indicator
Call for Quote for international purchases!
SKU: AVC637 -
Basler AVR, Marathon AVR, Mecc Alte AVR
Caterpillar AVR VR6 | Original
- Power: Shunt Excited
- Input: 180-280 Vac, 50/60 Hz, 1 OR 3 phase
- PMG Excited 63-105 Vac 100/240 Hz 3 phase
- Sensing input: 180-240 Vac, 50/60 Hz 1 OR 3 phase
- CT input: 1 or 5 Aac 50/60 Hz
- ACC input: +/- 3 Vdc. Output 65 Vdc @ 12 Adc
- Unit Type: Potted – Rugged
- Weight: 1.5 kgSize: 9.4 in x 7.1 in x 3.5 in
- 4 mounting holes
- 1 Year Warranty
Call for Quote for international purchases!
SKU: VR6 -
Transfer Switch with enclosure
DSP-10 | Generator Control Unit
- Microprocessor Based Design
- Universal LED Graphic Interface, Displays Generator Status and Failures
- Modular Design, Quick Installation
- Programmable Engine & Generator Controls Adapts Easily To Any Type Generator Set.
- Waterproof Front Panel With UV Protection
Call for Quote for international purchases!
SKU: DSP10 -
Analog Speed Controls
ECC Series | Speed Controls
ECC Series – Genset Voltage Frequency / Isochronous Speed Control / Full PID Setting / Designed to Govern from Frequency Signal of an AC Generator / No Magnetic Speed Pickup Needed
The ECC speed control unit is an electronic device designed to control engine speed with precise response to transient engine loads changes. The closed loop speed control, when connected to a proportional actuator and supplied with a speed signal/ frequency from the main AC generator, will control a wide variety of engines in an isochronous mode. The speed signal input must be in the frequency range of 40 to 80 Hz.
Call for Quote for international purchases!
SKU: ECCS -
Speed Controls
ECC328 | Speed Control
The speed signal input must be in the frequency range of 40 to 80 Hz. Other features include:
- 12 V or 24 V DC Light-Force (Low-Current Optimized PID)
- Isochronous operation
- No magnetic speed pick-up required
- For Genset only – 260 V AC MAX
- Rugged hard potted design
- Gain and stability adjustments
- Lower system cost
- The ECC328 is compatible with GAC ALN, ALR, 100, and 103 Series actuators.
Call for Quote for international purchases!
SKU: ECC328 -
Digital Governors
EDG5500 | Digital Speed Controls
- Save energy costs by regulating motor speed according to load requirements. GAC components are the best way to govern a generator where tight control of engine speed is desired, regardless of engine load.
- The EDG5500 Quikset display allows your operator to monitor and configure parameters without any external monitoring device. No software or PC required. Alpha Numeric display. Numeric display. Display speed, throttle position, Delta speed graph, or current supplied to the actuator. Configurable parameters. Warning indicator.
- EDG Series Electronic Speed Control – no analog bypass – selectable isochronous or downstream control – overspeed sensor – adjustable starting fuel strategy – black smoke reduction – variable speed control – AUX GAC / load sharing | Simple / Quick Setup LCD Screen UI UI with 5 push buttons, no potentiometers
- GAC High Performance Speed Control System Features: Identical mounting hole pattern to ESD5500E. Lockable screen to prevent unauthorized access. 2 fixed speeds (idle / idle) and variable speed. Adjustable starting fuel strategy (black smoke reduction). Speed ramping (ramping based on rating or any transient change and speed setting). Overspeed sensor. Magnetic speed input. Includes GAC standard AUX. to sync and share load
- Application in: military grade equipment, rail, marine, industrial, heavy machinery, gaseous engines, power generation, oil and gas and much more GAC is ISO 9001 certified | We carry the full line of Governors America Corp products, email Thunder Parts your requirements!
Call for Quote for international purchases!
SKU: EDG5500 -
Gas Engines
EDG6000 | Digital Governor – Multi-V DC
- Save energy costs by regulating motor speed according to load requirements. GAC components are the best way to govern a generator where tight control of engine speed is desired, regardless of engine load.
- EDG6000 | Multi-VDC Digital Speed Governor (CE) / Multiple PID Control for Full Operating Range Tuning / IP67 Sealed Case and Connector / RS232 and CAN J1939 Communications / SmartVU PC Software / 14-Pin Mating Connector not included
- Features: wide operating temperature range – Immune to analog drift – 4 selectable speeds: 3 fixed speeds with idle; 1 variable speed – Includes standard GAC AUX input for synchronizing and load sharing – User tamper resistant – No adjustable external switches or pots.
- EDG Series Electronic Speed Control – No Analog Bypass – Selectable Isochronous or Downshift Regulation – Top Speed Sensor – Adjustable Starting Fuel Strategy – Black Smoke Reduction – Variable Speed Regulation
- Application in: military grade equipment, rail, marine, industrial, heavy machinery, gaseous engines, power generation, oil and gas and much more GAC is ISO 9001 certified | We carry the full line of Governors America Corp products, email Thunder Parts your requirements!
Call for Quote for international purchases!
SKU: EDG6000
