The ESD2400 Series Speed Control unit is an all-electronic device designed to control engine speed with fast and precise response to transient load changes. This closed-loop control, when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal, will control a wide variety of engines in an isochronous or droop mode. It is designed for high reliability and is hard potted to withstand the engine environment.
Analog Speed Controls
ESD2400 Series | Speed Controls
ESD2400 Series Isochronous Controllers
• Isochronous Operation
• Hard Potted
• Idle Control
• Adjustable PID Functions
• Speed Trim Input
• Anti-Windup Circuit (Diesel or Gaseous)
Call for Quote for international purchases!
Part Numbers
| ESD2401 | 12 or 24VDC / Designed for Non-Feedback GAC Actuators | |
| ESD2402 | 12 or 24VDC / Light Force / Designed for Non-Feedback GAC Actuators | |
Related products
-
Magnetic Pickups
MSP678 | Magnetic Pickup
4.86 in [123 mm] Thread Length • Military-Style Connector without Mating Half Connector • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
SKU: MSP678 -
Analog Speed Controls
ESD5526E | Speed Controls
Multi-V DC • Light-Force (Low-Current Optimized PID) • Anti-Windup Circuit (Gaseous) • Recommended for T1/T2 ATBs
- Switchable droop control
- Adjustable PID
- Idle speed adjustment
- Auxiliary accessory inputs
- Speed ramping
- Soft coupling
Call for Quote for international purchases!
SKU: ESD5526E -
Magnetic Pickups
MSP679 | Magnetic Pickup
3 in [76 mm] Thread Length • Military-Style Connector • Same as MSP677 except with Mating Connector Kit EC1100 (Straight) • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
SKU: MSP679 -
Engine Mounted
110 Series | Actuator
The 110 Series Integral Actuator is designed to mount directly to DEUTZ 1011 series 2, 3 and 4 cylinder engines in place of the electric stop solenoid and available in 12 and 24 VDC. GAC’s unique linear electromechanical technology provides proportional actuator movement, based on actuator coil current. This unique, optimum fuel control, actuating device will outperform externally mounted types of electric actuators. An integral’ high performance speed control system results when the 110 Series electric actuator in installed on the engine and electrically connected to complementing governor system components. no external linkages or brackets are required and no extra DEUTZ parts are needed.
Call for Quote for international purchases!
SKU: 110S
