-
×
Original DSE BC2405 | Battery Charger | DSEBC2405
1 × $139.99 -
×
Original TPS051GT10-000 | Engine Heater
1 × $131.99
Subtotal: $271.98
Magnetic Pickups
MSP6729 | Magnetic Pickup
2.7 in [69 mm] Thread Length • 6 ft [1.8 m] Shielded Cable • Flying Leads • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Call for Quote for international purchases!
$164.19
2.7 in [69 mm] Thread Length • 6 ft [1.8 m] Shielded Cable • Flying Leads • Stainless
- -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
- Available for hazardous location installation (not certified)
- Produces electrical frequency
- Requires no energizing circuit from control
- Used on all GAC’s electronic speed controllers
Downloads
Related products
-
Universal
ALN Series | Actuator
(12VDC (or 24VDC) / 6.5 lbf. [3.0kg] / 0.25 ft-lb [0.34J] Work / Male Push-On Terminals)
The linear actuators are designed to provide highly accurate precise positioning for a close loop control with a minimum number of moving parts, which prolong the life of the actuator. The linear actuators provide a quick response time and can be use for different applications. The fast-acting actuator is completely self-contained. It requires only a firm mounting surface, appropriate linkage to the fuel control and electrical connection to the speed control unit. The actuators are not gravity sensitive and therefore can operate in any position. The actuators are compatible with GAC’s standard speed control units.
Call for Quote for international purchases!
SKU: ALNS -
Analog Speed Controls
ECC Series | Speed Controls
ECC Series – Genset Voltage Frequency / Isochronous Speed Control / Full PID Setting / Designed to Govern from Frequency Signal of an AC Generator / No Magnetic Speed Pickup Needed
The ECC speed control unit is an electronic device designed to control engine speed with precise response to transient engine loads changes. The closed loop speed control, when connected to a proportional actuator and supplied with a speed signal/ frequency from the main AC generator, will control a wide variety of engines in an isochronous mode. The speed signal input must be in the frequency range of 40 to 80 Hz.
Call for Quote for international purchases!
SKU: ECCS -
Pump Mounted
275 Series | Actuator
The 275 Series Electric Actuator is a second generation design more powerful than its predecessor. It is for Bosch-Style “P” 3000-7000 fuel injected Pumps. Coupling the 275 Series with a fuel pump results in a high performance fuel control system without external linkages or brackets. Two isolated chambers eliminates the possibility of any magnetic particles collecting and jamming the actuator. As a result, the 275 Series typically outlasts the life of a diesel engine and is maintenance-free. Camshaft bearing retainer kits, position feedback transducer and heavy duty bearing retention options are available.
Call for Quote for international purchases!
SKU: 275S
