Uncategorized
Stamford AVR MX341 | Original
- Features include:
- Stability adjustment *Optimum response selection
- Under frequency roll off adjustment *Dip adjustment
- Droop adjustment *Trim adjustment
- Over excitation adjustment
Call for Quote for international purchases!
The MX341 is a two phase sensed Automatic Voltage Regulator and forms part of the excitation system for a brushless generator. In addition to regulating the generator voltage, the AVR circuitry includes protective features to ensure safe reliable control of the generator. This model supercedes the Series 3 range (same footprint & wiring 1 extra terminal) This AVR is used only in cojunction with permenant magnetic type alternators.
Related products
-
Leroy Somer AVR
Leroy Somer AVR R450 | Original
The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers.
- Operating temperature: – 30°C to + 65° C. – Storage temperature: – 55°C to + 85°C.
- Shocks on the base: 9 g depending on the 3 axes.
- Vibrations: less than 10 Hz, 2 mm half-peak amplitude 10 Hz to 100 Hz: 100 mm/s, above 100 Hz: 8 g.
Call for Quote for international purchases!
SKU: R450 -
AVR | Generic Replacements
AVR VR6 | Generic
- Power: Shunt Excited
- Input: 180-280 Vac, 50/60 Hz, 1 OR 3 phase
- PMG Excited 63-105 Vac 100/240 Hz 3 phase
- Sensing input: 180-240 Vac, 50/60 Hz 1 OR 3 phase
- CT input: 1 or 5 Aac 50/60 Hz
- ACC input: +/- 3 Vdc. Output 65 Vdc @ 12 Adc
- Unit Type: Potted – Rugged
- Weight: 1.5 kgSize: 9.4 in x 7.1 in x 3.5 in
- 4 mounting holes
- 1 Year Warranty
Call for Quote for international purchases!
SKU: VR6G -
Leroy Somer AVR
Leroy Somer AVR R438 | Original
Fuse: F1on X1,X2.10A;slow-250V
- Voltage sensing : 5 VA isolated via trans- former • 0-110 V terminals = 95 to 140 V • 0-220 V terminals = 170 to 260 V • 0-380 V terminals = 340 to 520 V for other voltages, a transformer should be used.
- Voltage regulation ± 0.5%
- Normal or rapid response time via jumper ST2 (see below)
- Voltage adjustment via potentiometer P2 or apply a DC voltage of ± 1 V on the terminals of the external potentiometer
- Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. Š 2.5 VA cl1, secondary 1A (optional)
- Quadrature droop adjustment via potentio- meter P1
Call for Quote for international purchases!
SKU: R438 -
AVR | Generic Replacements
AVR R230 | Generic Replacement R250
- Voltage regulation: around ± 0.5%.
- Voltage supply/sensing range 85 to 139 V (50/60 Hz)
- Rapid response time (500 ms) for a transient voltage variation amplitude of ± 20% – Voltage setting P1
Stability setting P2. - Power supply protected by 8 A fuse, slow- blow action (tolerates 10 A for 10 s)
- Frequency: 50 Hz with ST3 jumper
- 60 Hz without ST3 jumper
- Factory-set underspeed protection P3. 2.2
- R230 AVR option
- Potentiometer for remote voltage adjustment, 1000 Ω / 0.5 W min: adjustment range ± 5%. – Remove the ST4 jumper.
Call for Quote for international purchases!
SKU: R230G
